KaVo Globus 1078 S, Инструкция по эксплуатации

Страница: 52 / 79

Using the timer
Setting the timer
The minimum timer time is 30 seconds, and the maximum timer time is 8 minutes.
▶ Press the "Timer" button until you hear a beep.
▶ Press the "Increase value" or" Decrease value" button until the desired timer
time is displayed.
▶ Press the "Timer" button again until you hear a beep.
The timer time is now saved.
Starting the timer
▶ Press the "Timer" button.
The set timer time runs. A tone sounds after the timer time is over.
4.7.7 Use the function keys (only with the Memospeed)
From the 14 functions, you can select two that can be retrieved using the function
keys.
Select and save the function
F1
▶ Press "F1" or "F2" until you hear a tone.
The programming mode is started.
▶ Press the "Increase value" or" Decrease value" button until the desired function
is displayed.
▶ Press the "F1" or "F2" button again until you hear a tone.
The function is saved on the button.
Calling up a function
Requirement
A function has been saved for the "F1" or "F2" key.
F1
▶ Briefly press the "F1" or "F2" button.
These saved function is triggered.
Instructions for use Globus 1078 S
4 Operation | 4.7 Setting functions
50/75