KaVo Globus 1078 S, Инструкция по эксплуатации

Страница: 51 / 79

The spittoon is rinsed.
▶ To stop rinsing before the set time, press the "Spittoon" button again.
4.7.3 Turn the x-ray image viewer on and off
▶ Press the "X-ray viewer" button.
4.7.4 Activate bell
▶ Press the "Preselected spray" key when the instrument is in the holder
The bell rings as long as the key is pressed
4.7.5 Turn the treatment light on and off using the cold light button
The KAVOLUX 1410 treatment light can be turned on and off using the cold light
key when a corresponding setting is made in service mode (group 9) and when a
DCA relay is installed.
▶ Set down all the instruments.
▶ Press the "Cold light" button to turn the treatment light on or off.
4.7.6 Set the time and use the timer (only with Memospeed) - Set the
time
Setting the timer
▶ Press the "Clock" button until you hear a beep.
▶ Press the "Increase value" or" Decrease value" button until the desired number
of hours is displayed.
▶ Briefly press the "Clock" button, and set the minutes by pressing the "Reduce
value" and "Increase value" buttons.
▶ Press the Clock" button again to set the seconds in the same manner.
▶ Then press the "Clock" button until you hear a beep.
The time is now saved.
Instructions for use Globus 1078 S
4 Operation | 4.7 Setting functions
49/75