KaVo EXTRAmatic 9040, Инструкция по эксплуатации

Страница: 49 / 56

Instructions for use EXTRAmatic 9040
7 Safety checks in accordance with IEC 62638 (VDE 0701 / 0702) | 6.2 Maintenance
7 Safety checks in accordance with IEC 62638 (VDE 0701 / 0702)
The applicable national legal regulations must be observed during the use of the de‐
vice, in particular:
▪ the applicable occupational health and safety regulations.
▪ the applicable accident prevention regulations.
The overarching guidelines and/or national laws, national regulations and the rules of
technology applicable to the startup and use of the KaVo product for the intended pur‐
pose are to be applied and complied with.
Compliance with the requirements of IEC 62638 (VDE 0701/0702) concerning product
safety upon start-up, after changes and repair as well as in recurrent tests is required.
Caution: Electrical safety checks have to be carried out by electrically skilled persons
or by individuals trained in electrical engineering and supervised by an electrically skil‐
led person.
An electrically skilled person is defined to be anyone whose training, knowledge and
experience as well as knowledge of the pertinent regulations allow him or her to as‐
sess and recognise possible hazards. The electrically skilled person in charge of test‐
ing has to make a decision whether nor not further individual tests are required in or‐
der to attain the safety target.
If safety deficiencies or damage is/are detected during the recurrent test, the testing
process must be discontinued and the device must be labelled accordingly and ban‐
ned from further use or submitted for repair of the defect.
49 / 56