KaVo EXTRAmatic 9040, Инструкция по эксплуатации

Страница: 27 / 56

Instructions for use EXTRAmatic 9040
4 Commissioning | 4.3 Connector
4.3.6 Connection via connecting lead
Note
It is essential that the electrical connection and extraction hose connection are as‐
signed to each other (see mark).
The total connected load must not exceed 1900 Watt, but may be distributed over 3
sockets.
If the unit is connected without a control line, a connecting cable is required between
the controller and extractor unit.
▶ Insert connecting lead ③ into socket ④ on the extractor unit.
▶ Insert the country-specific mains plug ① into socket ② of connecting lead ③.
1
5
2
0 3
1
5
3
2
1
4
4.3.7 Connecting the foot switch
▶ Place the foot switch ③ on the floor.
▶ To connect the foot switch ③ to the extractor unit, insert the foot switch lead ②
into the appropriate socket ① on the extractor unit (ensuring it is positioned cor‐
rectly).
27 / 56