KaVo ESTETICA E50 Life Скачать руководство пользователя страница 61

Страница: 61 / 162

Instructions for use ESTETICA E50 Life

4 Operation | 4.4 Moving the dentist unit

Note

Do not pull the dentist unit by the instrument hose.

▶

To adjust the height of the dentist unit, release the brake, adjust the
height, and reset the brake.

4.4.1 Moving the dentist unit TM

CAUTION

Excessive load on the support system

The patient or treatment personnel may be injured.
The support system may be damaged.

▶

Do not exceed the permissible maximum weight (generated e.g. by instru-
ments and accessories).

▶

Do not use the swinging arm for a support!

NOTICE

Damage from overloading the dentist element.

Exceeding the maximum weight of more than 2 kg by adding handpieces, ac-
cessories, etc., can cause damage.

▶

Do not overload the dentist element!

4.4.2 Moving the dentist unit S

CAUTION

Risk of injury by suspended instruments (S table).

Patients may get injured by sharp instrument tips.

▶

When you move the dentist's unit, make sure that nobody is injured.

▶

Alert patients and care providers to the risk of injury.

NOTICE

Damage from overloading the dentist element.

Exceeding the maximum weight of more than 2 kg by adding handpieces, ac-
cessories, etc., can cause damage.

▶

Do not overload the dentist element!

61 / 162

Содержание ESTETICA E50 Life



































































































































































Результаты поиска

Содержание ESTETICA E50 Life

Отзывы:

Бренды по названию

Популярные бренды

KaVo ESTETICA E50 Life, Инструкция по эксплуатации

Результаты поиска

Содержание ESTETICA E50 Life

Отзывы:

Бренды по названию

Популярные бренды