KaVo ERGOcom 3, Инструкция по эксплуатации

Страница: 44 / 58

Instructions for use ERGOcom 3
5 Operation
|
5.4 Operation, OSD menu display interface
5.4 Operation, OSD menu display interface
The overview diagrams were structured according to the type of image source and
the connected function:
VGA main menu Overview of main menu with VGA IN 1 or VGA IN 2
image source.
VIDEO main menu Overview of main menu with CAMERA, VIDEO IN 1 or
VIDEO IN 2 image source.
Menu point, other This menu point is the same for all image sources.
5.4.1 Call OSD menu display interface
Requirement
The image source whose screen settings are to be changed must be selected.
See also:
5.2.1 Operating mode, Page 25
5.3.15 Footswitch mode, Page 40
▶ Hold down the OSD menu button for < 2 seconds.
The OSD menu display interface is inserted on Display 1.
▶ Press OSD menu again for < 2 seconds to exit the menu.
5.4.2 Operate OSD menu display interface
Requirement
The OSD Display Interface menu was opened.
Navigation Function
Scroll in the current menu window. The selected menu
item will be highlighted.
Select the menu item or setting you want to change.
The setting that can be changed is white.
Exit the selected menu item or setting.
42/54