KaVo ERGOcom 3, Инструкция по эксплуатации

Страница: 40 / 58

Instructions for use ERGOcom 3
5 Operation
|
5.3 Operating ERGOcom 3 comfort/excellence
5.3.10 Change display view
Requirement
A video signal is shown on screen 1.
On screen 1, you can either display the images in full-screen mode or quad mode
(four at a time).
▶ Press the full-screen/quad mode button.
Note
The image number of the active image is shown in white.
▶ Press the full-screen/quad mode button again to return to full-screen mode.
5.3.11 Select image
▶ Select the required image using the 4 navigation buttons.
The still selected is retained as a still.
▶ Press the Freeze button.
The chosen still is deleted or the chosen active VIDEO image source is displayed.
or
▶ Press the footswitch.
The chosen still is deleted or the chosen active VIDEO image source is displayed
and the next image number selected automatically.
38/54