KaVo DSE Expert Скачать руководство пользователя | Manualshive

Страница: 28 / 74

background image

Instructions for use DSE Expert

4 First use | 4.1 Fitting and connecting

28 / 74

Install triple function handpiece

▶ Place the rubber pad ② and instrument hose ① onto the three-function handpiece

③ and screw them tight.

4.1.3 Connect the instruments

Instrument configuration according to the specific configuration: pneumatically oper-
ated handpieces and electrical motors INTRA LUX motor KL 701/703 and laboratory
handpiece K5plus. Up to 5 rotating handpieces can be connected to the unit. These
are recognised automatically on the control element. The optional laboratory hand-
piece must be preselected using the control element.

Note

There is no option of configuring a handpiece connection with the PiezoLED or IN-
TRA LUX motor KL 701/703. If preparations for the PiezoLED have been made,
only an air handpiece can be connected to the corresponding connection as an al-
ternative.

4.1.4 Installing the LED simulation lights

DANGER

Explosion hazard.
Risk of fatal injury.

▶ Do not use the product in areas where there is an explosion hazard.

DANGER

Electrical power.
Electrical shock

▶ If the light is attached, pull the mains plug of the unit and of the light or disconnect

all poles of the unit from the voltage source.

▶ Attach the EBS LED simulation light installation kit (Mat. no. 1.011.8778) to the

simulation unit.

▶ Screw the base of the light to the cover panel at the designated attachment sites.

«
...
26
27
28
29
30
...
»

Содержание DSE Expert











































































Отзывы:

Нет отзывов

Похожие инструкции для DSE Expert

Бренд: Tarot Страницы: 7

Бренд: ModelCraft Страницы: 12

Бренд: 3B SCIENTIFIC PHYSICS Страницы: 12

Бренд: Aurora Страницы: 16

Renewable Energy Education Set

Бренд: Horizon Fuel Cell Technologies Страницы: 4

Бренд: FUTABA Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды