KaVo DIAGNOcam Vision Full HD, Инструкция по эксплуатации

Страница: 22 / 52

Instructions for use DIAGNOcam Vision Full HD
4 Installation of the wall mount
22 / 52
4 Installation of the wall mount
The wall mount can either be screwed to the wall or glued to the treatment unit
or to another surface.
Screw the wall mount to wall
▶ Mark the holes in the desired position using the wall mount.
▶ Drill holes with a diameter of 6 mm, insert the dowels and screw the wall
mount tight with screws.
Glue on the wall mount
NOTICE
No secure hold of camera and wall mount.
Property damage.
▶ Check that the wall mount and camera are securely held.
Requirement
The surface to which the wall mount is glued must be flat, smooth, clean and
free of grease.
▶ Remove the adhesive tape from the back of the mounting rail and stick it to
the desired position.