KaVo DIAGNOcam Vision Full HD, Инструкция по эксплуатации

Страница: 13 / 52

Instructions for use DIAGNOcam Vision Full HD
2 Safety | 2.9 LED light
2.9 LED light
LED light is associated with the risk of eye damage.
▶
Do not direct LED illumination towards the eyes and do not look into the
LED exit opening.
▶ Do not operate the product when the housing is damaged or opened.
2.10 Service and repair
Repairs and servicing may only be performed by trained service personnel. The
following persons are authorised to do this:
▪ Service technicians of KaVo branches after the appropriate product training
▪ Service technicians of KaVo authorised dealers after the appropriate
product training
▶
Only use spare parts that comply with the specification for repair; original
KaVo spare parts comply with the specification.
Note
If a repair is done with NON-KaVo original spare parts, this may constitute a
product modification that leads to the loss of CE conformity. In the event of
damage, the responsibility is with the service company or the operator.
The introduction into the market of a modified product, where there is reas-
onable suspicion that the safety and health of patients or users may be jeop-
ardised, is prohibited by the German medical device law §4, section 1 no. 1
and requires a separate conformity check.
Cleansers and disinfectants that have not been approved can damage the
plastic housing possibly leading to hairline cracks and other damage which can
ultimately cause hazards.
Damage from the ingress of liquids.
▶
Make sure that no liquid enters the inside of the device.
Servicing foot control:
▶
If needed, exchange the battery.
2.11 Cybersecurity
The camera device uses common open standards for video streaming and
device interaction in order to work with your application software.
The camera device does not have any internal functions to interact with any
network services.
▶
Please read the manual of your application software for further information.
13 / 52