KaVo COMPACTtorque 636, Инструкция по эксплуатации

Страница: 12 / 26

5 Operation
Note
At the beginning of each workday, the water-conducting systems should be
rinsed for at least 2 min. without the instrument being attached; if there is a risk
of contamination from reflux or back suction, the system must be rinsed for 20-30
seconds.
5.1 Attach the medical device
▶ Connect the COMPACTtorque turbine with the hose, and screw it tight clock‐
wise.
5.2 Removing the medical device
▶ Hold the COMPACTtorque turbine, and screw the hose connection anticlock‐
wise to loosen it.
5.3 Insert the milling cutters or diamond grinders
WARNING
Use of unauthorised drill bits or burs.
Injury to the patient or damage to the medical device.
▶ Only use drill bits or burs that do not deviate from the specified data.
CAUTION
Injury from using worn cutters or grinders.
Cutters or grinders can fall out during treatment and injure the patient.
▶ Never use cutters or grinders with worn shafts.
▶ Follow the instructions for use supplied by the cutter or grinder manufacturer!
CAUTION
Injury from improper use of carbide cutters or diamond grinders.
Never use metal cutters or grinders with worn shafts can fall out during treatment
and injure the patient.
▶ Never use cutters or burrs with worn shafts. Do not use tools that deviate
from the indicated data.
▶ Follow the manufacturer's instructions; only use the tool for the proper pur‐
pose!
CAUTION
Danger of injury from cutters or grinders.
Infections or cuts.
▶ Wear gloves or fingerstalls.
Instructions for use COMPACTtorque 636 - 0.553.0810 COMPACTtorque 636C - 0.553.0830
5 Operation | 5.1 Attach the medical device
10/22