Katadyn Spectra Bimini 300, Инструкция по установке и эксплуатации

Страница: 14 / 88

14
Double rubber mounts
to absorb vibration
This module must be installed in an area that maintains a temperature below 113°F (45°C). It
may be placed as high in the boat as you desire, and mounted in any position, even upside
down. Make sure that the area around and under the pump does not have any water sensitive
equipment, as water will be spilled during any repairs or if a leak occurs. Allow for easy access
to the pressure relief valve.
The Clark pump and membrane module comes complete with a mounting system. Be sure to
use the supplied washers on the rubber feet.
Pressure Relief Valve
Components continued...
Clark Pump and Membrane
Remote Touchscreen
The remote control panel can be mounted anywhere dry and
convenient. Cut a 5 - 5/8” (12.7 cm) wide by 3 - 1/4” (7.62 cm)
high opening for the panel. The display needs minimum 2
1/2” deep clearance for the cable. Take care not to damage the
plugs on the ends of the cable when routing. Use only a Spec-
tra - approved cable.