Katadyn Spectra Bimini 300, Инструкция по установке и эксплуатации

Страница: 13 / 88

13
Components
Feed Pump Module
Mount the feed pump module on a vertical surface, up
to 3 - feet (1.0M) above the waterline. It is preferable to
mount as low as possible. Locate in an area that allows
easy access to both the filters, and the left and right side
of the enclosure (3 inches or more). Keep future
maintenance in mind when choosing a location, and do
not mount above water - sensitive equipment. The feed
pump has overheat protection and will not operate
properly at ambient temperatures over 113°F (48°
C).
Sea Strainer and Boost Pump Module: Mount close to the
intake through - hull, below the waterline, in a location that
can handle water spillage during service. The boost pump
power cable will connect to the feed pump module.
Fresh Water Flush Module: The fresh water flush module may
be located in any convenient location near the feed pump module.
It should be mounted with the filter housing vertical and accessible,
with 2” below the housing for filter changes. Do not install over
electrical equipment. The unit contains the charcoal filter, a sole-
noid shut off valve, and a flush water flow regulator.
IF INSTALLING THE Z±ION, SEE Z±ION INSTALLATION
INSTRUCTIONS FOR MORE DETAILS.