Katadyn EK-24, Инструкция по эксплуатации

Страница: 20 / 43

Katadyn Page 19
11.4 Mount the anodes to the activator EK-X/24
Before working on the control cabinet or activator, be certain to unplug it
from the power socket and wait at least 5 minutes until all components have
discharged.
•
Screw in all the anodes on the activator head in following order
o 2 Anodes
o 3 anodes
o 4 anodes
o 6 anodes
•
Insert the outer cathode over the anodes and place it flush against the activator head
• Ensure the guide pins are properly aligned with the guide holes in the outer cathode
Make sure, the anodes and the cathodes are mounted accordingly (shown the anode-/cathode-
combination of a Type EK 6/24)
View of the inside of the
outer cathode without central
cathode and anode installed View of the inside of the outer
cathode with central cathode
and anodes installed