background image

6  Attention

Maintenance

Maintenance of base plate

Once KAT Shoes match the materials of the KAT WALK base plate, there will be a fixed friction coefficient, which is the 
balance point for the best experience. Thus, abrasion to the base plate will influence the product experience and the 
service life of the base plate. In view of that, please note the following before the use:

Health Warnings

The following health warnings will be updated on an irregular basis for accuracy and 

completeness

Instructions for daily maintenance of three-in-one cable and sensors power supply cable

It is necessary to carry out the daily maintenance of the three-in-one cable and the sensors power supply cable to 
prevent them from being damaged due to entanglement. Check if the three-in-one cable and the sensors power supply
cable have any tangling every day by following the steps below:

                 

Instructions for regular examination of girdle

When a customer weighing beyond the limit (>100kg) or with an overly sized waist, please duly check if the girdle set 
has deformed.  It is advised to conduct a regular examination on the girdle set every other week, mainly checking if the 
bolt at the connection on the back of the girdle set has loosened, if the washer at the bolt bottom has come off, and if  
the girdle set has deformed. Any problem of the girdle set may cause safety issues. As it is a component that is prone to 
wear and tear, the warranty period for it is three months from the issuance of the invoice. Please immediately contact 
the after sales service by dialing the KAT hotline if any of the above situations occur.

Step one: entanglement of the three-in-one cable and the sensors power supply cable (tangling): based on the 
tangling direction, rotate the connecting rod in a reverse direction until the three-in-one cable is separated from 
the sensors power supply cable.
Step two: twisting of  the three-in-one cable (twisting, and marked wrinkles can be seen on the outside): take off 
the head-mounted display, and based on the twisting direction, rotate the display in a reverse direction until the 
cable returns to the smooth state with no twist.

Prevent the base plate from contacting with non KAT Shoes or any other object. 
Make sure the base plate is clean without any dirt before using the machine every day. If necessary, please apply a 
drop of the complimentary equipment dedicated maintenance oil (only one drop is needed). 
Check if there is any dirt on the sole sliders and wheels of KAT Shoes.  

Please read the User Manual before using the product and follow the instructions to do the settings. Incorrect 

settings may increase the risk of discomfort.

Pregnant women, the elderly, or those with visual disorder, having a medical history of mental illness or were once 

affected by serious medical conditions such as heart disease, are advised to consult a doctor before using the 

product.

As different people have different constitutions, use of the product for a long time is not recommended in case of 

any discomfort, such as giddiness, dizziness or headache. If you feel any discomfort, please immediately stop using 

it and do not engage in any activities that may involve danger (such as driving), until all the symptoms are gone. If 

the symptoms persist, please do not continue to use the product without consulting to a doctor.

If the user has a medical history of epilepsy or photosensitive epilepsy, please consult a doctor before watching 

such VR contents as flashing light sources or fast image sequences.

Children  should  use  the  product  under  their  parents’ administration  to  prevent  any  of  the  above  mentioned 

discomfort. As the visual system of children under 13 years old is not fully developed, they are not advised to use 

the product.

It is not advised to use the product for too long for the first time (limit it within a few minutes). The duration should 

be increased bit by bit only after the gradual adaption to the virtual reality.

A comfortable VR experience requires intact sense of movement and balance. Thus, if users who are tired, need 

sleep, are affected by alcohol or drugs, are under hangover, nervousness or anxiety, or have a headache or earache, 

are strictly prohibited from using the product. Otherwise, it will lead to more severe discomfort.

Содержание WALK




























































Отзывы: