9
Cod. 2050-0001 Rev 1.1
Install the drain bracket on the 40mm diam. sink drain siphon.
Check that the seal rests properly on the pipe and the bolts are tight.
Remove the nut of the drain.
By using a 2 mm drill bit, drill a hole in the exhaust pipe of the siphon, at the nut
just disassembled.
Insert the drain pipe into the nut and tighten the nut on the bracket.
Tighten the nut and install the valve with the arrow pointing towards the
bracket, as close as possible to the drain.
1
2
5
3
4
6
3.1
DRAIN BRACKET INSTALLATION
1.
Drain siphon
2.
Drain clamp
3.
Screw
4.
Drain pipe nut
5.
Drain pipe ¼”
6.
Check valve ¼”
