Instruction
Manual
www.crh.com.au
Instruction
Manual
www.crh.com.au
1
ENTRAPMENT ALARM
Features:
•
Easy push panic button
•
High output blue LED strobe lights
•
9V battery back-up
•
100db piezo siren
•
IP65 rated
•
12v
DC Transformer & weather proof utility
box
•
Simple twist to reset
•
OH&S & Australian Building Code compliant
•
Optional “Door Open” alarm
•
Remote dialer connection
Installation:
1.
Install the supplied utility boxes &
conduit in the desired location (best
location would be in the
vicinity
of the
“Inside Release Handle” for hinged doors
or “Pocket/Lever Handle” for sliding
doors. Utility box for Alarm Module
should be mounted high on the wall
where staff have an unobstructed view
of
the flashing LED lights.
Run the cable
from the Panic Module to the Alarm
Module & attach to the "Panic"
connection
2. Plug the K1967-946 power cable into
either of the 2 "hub" connections and
r
oute
the
cable
from the “Alarm Utility
Box” to the
12v DC Transformer.
K1967-57HW
Note: This is a hard-wired mains supply system and should
only be installed by a licensed Electrician
