Wireless ADSL Router
USER MANUAL
12
Item
Description
VPI/VCI
Enter the PVC that your ISP gives you.
Enable NAPT
NAPT extends the notion of NAT one step further by also translating
the transport identifier (TCP and UDP port numbers, ICMP query
identifiers). This allows the transport identifiers of a number of
private hosts to be multiplexed into the transport identifiers of a
single public IP address.
Enable IGMP
IGMP(Internet Group Management Protocol) is a network-layer
protocol used to establish membership in a Multicast group- it is not
used to carry user data. IGMP version 2 (RFC 2236) is an
improvement over version 1 (RFC 1112) but IGMP version 1 is still
in wide use.
PPP settings:
User name &
password
Enter the user name and password that your ISP gives you.
PPP Settings:
Type
Continuous: If you want to access the Internet all the time,
select Continuous type.
Connect on Demand: Select this type when you don’t want the
connection up all the time and specify an idle time-out in the
Idle Time field.
Manual: When connect type of PPPoE and PPPoA only is
"Manual", the "Connect" and "Disconnect" button will be
enable.
