KA1750 Wireless Router
User Manual
30
• RADIUS Server – Enter the IP address of the RADIUS server.
• RADIUS Port – Enter the port number of the RADIUS server. The default
is1812.
• Shared Key – Enter the key shared between the Router and the server.
WPA/WPA2 - Personal(WPA-PSK/WPA2-PSK)
Version - You can select one of following versions,
• WPA-PSK – Pre-shared key of WPA.
• WPA2-PSK – Pre-shared key of WPA2.
• PSK Password –You can enter ASCII or Hexadecimal characters. For
Hexadecimal, the length should be between 8 and 64 characters; for ASCII, the length
should be between 8 and 63 characters.
7.2.4 WPS Setup
Wi-Fi Protected Setup(WPS)
WPS function will help you add a new device to the network quickly. If the new
device supports Wi-Fi Protected Setup and is equipped with a configuration button,
you can add it to the network by pressing the configuration button on the device and
then press the button on the Router within two minutes. The status LED on the Router
will light blue for five minutes if the device has been successfully added to the
network. If the new device supports Wi-Fi Protected Setup and the connection way
using PIN, you can add it to the network by entering the Router's PIN.
• WPS Status – Enable or disable the WPS function here.
