LED4S19 UNIVERSAL STAINLESS STEEL LIGHTING
MANUAL
884055 / 2021.1.2
4
A
B
UNIVERSAL MOUNTING INSTRUCTIONS
UNIVERSAL MOUNTING INSTRUCTIONS
1�
Attach the S19 bracket (F) to the light fixture (C) by using two 1/4”-20 x 1/2”’ hex screws (D) on either side in combination with 1/4”
lock washers (E). 7/16’’ wrench required. Repeat this step for all fixtures.
2�
(Optional) If you want to use one of the color choices
instead of the standard soft white light, peel the protec-
tive lining from both sides of the colored lens (B) of your
choice. Place the lens inside the lens cap (A) making
sure the 3 flaps are holding the lens in place. Repeat this
step for all lens caps. Continue to Step 3.
No gap
Flaps behind lens
Fig. 2
Fig. 3
3. (Optional) Place lens caps over the light fixture (C)
as shown� Ensure the cap is seated all the way down
onto the fixture housing. Make sure the fixture and
lens are clean before installing the lens cap� Repeat
for all fixtures.
Fig. 5
Fig. 4
Back to Contents