Kartsana SUPERBRAVO 2, Инструкция по эксплуатации

Страница: 16 / 24

OPERATING AND HANDLING OF
SUPERBRAVO RAIL
Rev.2
05-05-2023 15
3.2. Electrical connection
The electronics are designed to accept 12 V current.
The SUPERBRAVO 2 rail must be connected to the vehicle's electrical system with
an electrical cable of at least 4 mm2 cross-section (pay special attention to the + or
- poles). The purpose of this connection is for the SUPERBRAVA stretcher to charge
the battery when it is inside the ambulance.
It is recommended that this cable be protected on the outside with a plastic sheath to avoid
electrical problems (chafing, short circuits, etc).
Secure the electrical system through a 20A fuse. (the fuse is incorporated behind the back
plastic plate in the centre of the rail)
It must be ensured that the positive pole is as indicated in the figure, otherwise the stretcher will
not be loaded into the vehicle.