Ulteriori informazioni su:
www.karmaitaliana.it
9
8
WARNING:
the infrared sensor of the bodyback is situated behind the battery case’s
cover (3). Open it to do the frequency matching procedure.
Attenzione:
il sensore infrarossi del lavalier è posto dietro il coperchio(3) del vano
batterie. Apritelo per effettuare la procedura di accoppiamento della frequenza.
Frequency manual choice:
Choose the wished frequency, by acting on the buttons (15- 16). To send it to the
microphone, turn it on and place the infrared sensor at some cm from the transmitting
led (14), then press again the button (12- 13) to activate the infrared transmission. After
two seconds the process should be concluded and the microphone should indicate the
same frequency of the receiving base.
WARNING:
the infrared sensor of the bodypack is situated behind the battery case
cover. Open it to carry out the frequency matching procedure
RECEIVING BASE DISPLAY
The two displays on the receiving base show constantly the signal reception status.
Please refer to image below for more detailed information.
MICROPHONES’ DISPLAY
RF Level:
It shows the
power of the carrier
signal.
DEV Level:
Shows the
power of the received voice
signal.
Selected channel
The display (13) on the microphone shows, besides the operating frequency, the
charge level of the batteries and the indication “mute” (if this function is enabled)
ENGLISH
