141
TIRE REPAIR KIT
USING THE COMPRESSOR
1.
Release the black air only hose from the
sealant canister on the base of the tire
compressor.
2.
Detach the 12V power supply connector
and plug into one of the vehicle’s
accessory power supply sockets.
3.
Attach the air only hose to the tire valve
and press the lever down to secure it in
place.
4.
Ensure the compressor is standing
upright with the pressure gauge facing
up.
5.
Turn on the compressor to inflate the
tire.
REPLACING THE CANISTER/AIR
HOSE ASSEMBLY
1.
Release the black air only hose from the
sealant canister on the base of the tire
compressor.
2.
Unwrap the clear sealant/air hose from
the compressor.
3.
Rotate the sealant canister so the clear
sealant/air hose is aligned with the slot
in the compressor.
4.
Lift the canister/air hose assembly from
the compressor.
Note:
Installation of the new canister is the
reverse of the removal process.
Содержание REVERO 2017
