Karma Leon F Kameleon, Руководство пользователя

Страница: 39 / 136

31
step 6: while the right seat width is set, tighten the four bolts again in the
designated holes. Put back the top seat plate, re-tighten all the screws and
finish the setting.
11.2.2 Seat depth
The seat depth is arranged by two seat panels overlapping each other. By
changing the amount of overlapping, we can change the seat depth. To adjust
the seat depth, we must take the following steps:
step 1: take off the seat cushion and the seat wedges, if mounted.
step 2: loosen the screws (A) using an 4mm Allan key of each seat panel.
step 3: slide the seat plates (left and right side) forward to the required seat
depth in steps of 20mm.
step 4: tighten all the screws (A) again.
step 5: put the seat wedges and cushions back into place.
For adjusting the seat sizes, normally it will be handled by your local
supplier, together with your therapist. If the seat depth gets much bigger,
another size of cushions may be required. Contact your local supplier.
A