Karma KP-45.6, Руководство пользователя

Страница: 25 / 64

13
5.1 How to Operate Your wheelchair
Note: Before using this wheelchair, make sure that the following parts are
assembled as below. In the cases that the following parts are not
assembled, do complete the assembly referring to the figures. Should
you have any question about the assembly, please contact your
authorized Karma dealer.
-Anti-Tippers
Complete the assembly of
anti-tippers according to the
figure at the left.
-Gas Strut
Complete the assembly of the
gas strut according to the figure
at the left.
-Actuator
Before use the wheelchair please
assemble the actuator according
to the figure at the left.
Do not operate this equipment without first reading and understanding this
manual. Do not change the parameters of the controller which has been
preset in the factory. If it is necessary to modify the parameters, contact Karma
technical personnel to modify it. This will ensure the safety of the user and the
modification that is complied with the relative regulations. Do not change or
modify any electric circuit because this can cause injury or damage.