Preparation
Instructions for use • TELE PACK + • CQH848_EN_V2.0_08-2022_IFU_CE-MDR
27
4.
Connect an external monitor to the DVI D-video output.
5.5 Connecting the light cable
WARNING
Hot light connections! Risk of burns!
The high level of light intensity produced by the light source may cause the light connections and
adjacent components to heat up. This can cause burns to users and third parties.
Switch off the light source before changing the light cable.
Allow the product to cool down before changing the light cable.
1.
Insert the light cable into the light connection until the light cable engages. Hold the light cable
only by the handle, never by the cable.
5.6 Mounting the camera head holder
Using the camera head holder (TP002), the camera head can be stored between two interventions,
and a light cable can be attached to the mount provided.
1.
Make sure that the light source is switched off.
2.
Connect the light cable to the camera head holder.
