Preparation
Instructions for use • Clamping Jaws with a Dovetail Connection • TYA258_EN_V1.0_02-2021_IFU_CE-MDR
10
5 Preparation
5.1 Unpacking the product
1.
Carefully remove the product and accessories from the packaging.
2.
Check the delivery for missing items and evidence of shipping damage.
3.
In the case of damage, hidden defects, and short deliveries, document their nature and
extent and contact the manufacturer or supplier immediately.
4.
Keep packaging for further transport.
5.2 Testing the product
1.
Inspect the product for visible contamination. Do not use if contaminated.
2.
Inspect the product for the following characteristics:
–
Good working order
–
Functionality
–
Correct assembly of the components
–
Completeness
5.3 Installing the clamping jaw
1.
Insert the dovetail on the clamping jaw into its counterpart on the POINT SETTER.
2.
Fix the dovetail in place with the fixation screw on the POINT SETTER.
5.4 Installing the VITOM 3D in the clamping jaw 28272VTP
ü
The holding system is fixed in place.
