Kargo Master 4A824, Инструкция по эксплуатации, Страница: 6 / 7

Instructions – 4A824
For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST) Page 5
Step 3 – Attach End Stops

Using a 5/16”-18 x 1” hex head bolt, 5/16” lock washer,
and 5/16” flat washer, loosely bolt a slider plate to an end
stop. The press nuts on the slider plate face up. DO NOT
TIGHTEN.

Repeat for remaining end stop.

Slide an assembled end stop onto a crossbar with the angled flanges facing outward until slider plate
aligns with end of crossbar. Be sure to insert slider plate so it cannot rotate.

TIGHTEN hardware securing end stop to end of crossbar.

Repeat for opposite side of cross bar.
