Kärcher VC 3, Руководство по обслуживанию, Страница: 11 / 13

English 9.764-892.0 Rev. 00 (07/17)
11
1 Hood
2 Latching tabs
3 Cable inlet
4 Supply Cord
 Unlock latches.
 Remove the cable inlet.
 Pull the power cable out of the cable inlet.

ABHA Uninstalling / installing cover
1 Electric socket plug connections

Separate the electric connectors.
1 Cable coiling shaft
2 Cover
3 Cable coiling
4 Supply Cord
 Disconnect the cable coiling shaft from the housing.
 Remove the cable coiling device along with the power
cable.
Note
Pay attention to correct positioning!
1 Screws
2 Cover
 Unscrew the screws.
 Remove the housing.
AHST Remove/install the suction turbine