– 5
* depending on model
Figure 11
The setting process of sensor 2 starts
automatically after the watering setting
of water outlet 1. If the water outlet 1 re-
mains inactive, teaching of the water
outlet 2 must be enabled by pressing
the OK button. The seconds countdown
starts for water outlet 2. Teaching of
sensor 2 is equivalent to sensor 1.
Note:
In order to change the operating
mode of an outlet or to add a sensor, the
teaching process must be restarted.
Remove the batteries from both sen-
sors and the control unit.
Reinsert the battery in the control unit.
As soon as the symbols appear on the
display, press the
OK button
until the
time on the display is flashing.
Reset the time and start the teaching
process of sensor 1, then of sensor 2.
Identical with "irrigation settings of wa-
ter outlet 1".
The
menu button
activates the settings
mode.
Arrow keys select the water outlet to be
set,
OK button
starts the adjustment
cycle.
The settings remain saved even without
battery supply.
Valves can be opened manually:
The
menu button
activates the settings
mode.
Use the arrow keys to select the tap and
confirm your selection with the
OK but-
ton
.
The valves are opened/closed by re-
peatedly pressing the arrow keys.
The
esc button
terminates the manual
irrigation and switches back into the au-
tomatic mode.
Can be activated in every mode (auto-
matic watering and 24h-function).
Hold the left arrow key down for at least
3 seconds in order to open the left valve
manually.
Depending on the scope of delivery, the
same procedure with the right arrow
key applies to open the right valve.
The valve is open.
Press the left/right arrow key briefly in
order to close the opened valve or to
open it again.
If both valves are closed, the device au-
tomatically returns to the previous
mode after 30 seconds.
Terminate the manual watering by
means of the
OK button
or
esc/menu
button
. The valve is closed and switch-
es back into the automatic mode.
If the valve unit loses contact to a sen-
sor (no signal as, for example, the sen-
sor battery is empty), the watering is
time-controlled.
Note
ECO delay days are considered.
Advantage:
Guarantee of continuous
watering, plants do not dry out.
Preparation / teaching sensor 2*
Irrigation settings of water outlet 2
Further functions
Changing the settings of the water
outlets
Manual irrigation of the water
outlets
Quick access manual watering
Failure safety function
15
EN
