Kärcher SE 3-18 Compact, Оригинальная инструкция по эксплуатации

Страница: 7 / 12

English 7
Symbols on the device
Description of the device
Depending on the model selected, there are differences
in the equipment. The specific equipment is described
on the device packaging.
For the illustrations, refer to the graphics page.
Illustration A
1
Spray/suction hose connection
2
Power switch (1 (ON) / 0 (OFF))
3
Waste water tank with lid
4
Fresh water tank with lid
5
Fuel cap
6
Carrying handle
7
Holder for accessories
8
Storage for sponge, brush, detergent bag
9
Battery pack mounting
10
*Rechargeable battery pack
11
Spray/suction hose with rotating handle
12
Upholstery nozzle for spray extraction
13
Crevice nozzle for spray extraction
14
Detergent RM 519 (100 ml)
15
*Charger
* optional
Battery pack charging
1. Charging the battery pack (see operating instruc-
tions and safety instructions for the battery pack and
the charger).
Initial startup
Pre-cleaning
Note
As the device does not have a dry vacuum function, if
necessary remove coarse-grained dirt (e.g. crumbs)
with a commercially available vacuum cleaner before
cleaning the textiles.
Connecting accessories
1. Press the spray/suction hose into the spray/suction
hose connection on the device until it latches into
place.
● For removal, press the latch and pull the spray/suc-
tion hose out.
Illustration C
2. Connect the upholstery nozzle or crevice nozzle to
the handle, depending on the application case.
● To separate the upholstery nozzle and crevice noz-
zle, press the catch on the handle and pull the spray/
suction hose off.
Illustration D
Illustration E
Filling the fresh water tank
ATTENTION
Only switch on the device when the fresh water tank and
waste water tank are installed.
ATTENTION
The fresh water and waste water tanks must be firmly
seated in the device.
ATTENTION
The use of unsuitable detergents can damage the de-
vice and result in loss of eligibility for warranty claims.
Note
If necessary, use KÄRCHER RM 519 detergent for
cleaning upholstery.
● Symbols for system
cleaning after use are
present on the inside
of the fresh water
tank:
1 Fill the fresh water
tank with tap water.
2 Insert the crevice noz-
zle completely into
the tank opening and
switch the device on.
See also chapter
Fin-
ishing operation
● Observe the manufacturer's dosing quantity recom-
mendations when dosing with detergent.
● Pour in the detergent and then fill up to "Max" with
water.
● The complete filling quantity is max. 1.6 litres.
Note
The fresh water tank can be removed at any time for fill-
ing or be filled directly on the device.
Filling the water tank directly on the device
1 Pull the tank cap upwards and turn it sideways.
Dose the detergent according to the specifications
and then fill the tank with water up to the "MAX"
mark.
Illustration F
2 Close the tank cap.