Kärcher SC CTK 10, Оригинальная инструкция по эксплуатации

Страница: 26 / 30

– 14
Illustration
 During work breaks, hook the floor nozzle into the
parking holder.
Rinse the steam cleaner boiler at the latest after 10 boil-
er fillings.
 Fill the boiler with water and shake it strongly. This
dissolves lime scaling residing on the boiler bottom.
Illustration
 Empty water out.
Note:
If you always use usual commercial distilled water it is
not necessary to descale the boiler.
As limescale builds up on the boiler walls, we recom-
mend to descale the boiler in the following intervals
(RF=reservoir fillings):
Note
The hardness of the tap water can be inquired at your
water management office or the municipal utilities.
Illustration
 Turn off the appliance.
See Chapter „Turning Off the Appliance“.
 Allow device to cool down.
 Remove the safety lock from the device.
Illustration
 Completely empty the water tank to remove exist-
ing water.
 Use KÄRCHER decalcifying agents for descaling.
Please follow the dosing instructions on the pack-
aging when preparing the descaler.
ATTENTION
Use caution when filling and emptying the steam clean-
er. The descaling solution can have an aggressive ef-
fect on delicate surfaces.
 Completely empty the descaling solution after 8
hours. A small amount of the solution will remain in
the boiler. Therefore, you should rinse the boiler
two to three times with cold water to remove any
residues of the descaler.
Illustration
 Completely empty the water tank to remove exist-
ing water.
(Accessories - depending on scope of delivery)
NOTICE
The floor cleaning cloth and the cover for the manual
nozzle have been washed beforehand and can be used
immediately for working with the appliance. The micro
fibre cloths are not suitable for dryer.
NOTICE
When washing the cloths, observe the instructions on
the washing tag. Do not use any liquid softeners as this
will affect the ability of the cloths to pick up dirt.
 Wash the floor cleaning cloths and covers at a max.
temperature of 60 °C in the washing machine.
Often, failures have simple causes and you can do the
troubleshooting yourself using the following overview. If
you are in doubt or if the failure is not listed here please
contact the authorized customer service.
 Descale the steam boiler.
 Turn off the appliance.
 Refill water
Steam switch is secured with the lock / child-proof lock.
 Move the selector switch for the steam volume to
the front.
 Press the steam gun until less water is emitted.
 Descale the steam boiler.
Parking the floor nozzle
Care and maintenance
Rinsing the boiler
Descaling the boiler
Degree of hardness ° dH mmol/l RF
I soft 0- 7 0-1,3 55
II medium 7-14 1,3-2,5 45
III hard 14-21 2,5-3,8 35
IV very hard >21 >3,8 25
Care of the Accessories
Troubleshooting
Long heating-up time
Steam boiler is decalcified
No steam
No water in the steam boiler.
Steam lever cannot be pressed anymore
High water output
Steam chamber too full
Steam boiler is decalcified
26 EN