Kärcher OC 3, Руководство пользователя, Страница: 7 / 16

English 7
Transport
몇
CAUTION
Risk of injury and damage
Be aware of the weight of the device during transporta-
tion.
1. Observe regulations for dangerous goods during
transport.
Manual transport
1. Lift and carry the device by the carrying handle.
Transport in vehicles
1. Secure the device against slipping and tipping over.
Storage
몇
CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device during storage.
Storing the device
1. Place the device on a level surface.
2. Store the device within the permissible temperature
range (see Chapter Technical data ).
Frost protection
ATTENTION
Danger of frost
Incompletely emptied devices can be destroyed by
frost.
Completely empty the device and accessories.
Protect the device from frost.
1. Drain the device (see Chapter Ending operation ).
Care and service

DANGER
Touching live parts
Danger of injury from electric shock
Switch off the device and unplug the charger from the
device before performing any work on the device.
Cleaning the valve opener/fine filter
Clean the valve opener and fine filter regularly.
ATTENTION
Material damage due to incorrect cleaning
Take care not to damage the valve opener and filter.
1. Pull the water reservoir vertically upwards.
2. Remove the valve opener using the suction hose
connection or a suitable pair of pliers.
Illustration G
3. Plug the suction hose connection onto the fine filter.
Illustration H
4. Remove the fine filter using the suction hose con-
nection or a suitable pair of pliers.
Illustration I
5. Clean the valve opener and fine filter under running
water.
6. Fit the fine filter and valve opener. Ensure that the
pin of the valve opener points upwards.
Troubleshooting guide

DANGER
Touching live parts
Danger of injury from electric shock
Switch off the device and unplug the charger from the
device before performing any work on the device.
Have repair work and work on electrical components
carried out by the authorised customer service only.
Malfunctions often have simple causes that you can
remedy yourself using the following overview. When in
doubt, or in the case of malfunctions not mentioned
here, please contact your authorised Customer Service.
Device not running
The charging state of the battery is too low.
1. Check the charging state of the battery and charge
it if necessary.
Motor overloaded; the motor circuit breaker has tripped.
1. Switch off the device.
2. Switch the device on and resume operation.
The ambient temperature lies outside the permissible
range (see Chapter
Technical data ), the motor circuit
breaker has tripped.
1. Switch off the device.
2. Allow the device to cool down/heat up.
3. Switch the device on and resume operation.
Have the device checked by Customer Service if
this malfunction occurs repeatedly.
Device does not reach required pressure
1. Make sure there is enough water in the tank or water
container.
2. Clean the valve opener and fine filter (see Chapter
Cleaning the valve opener/fine filter ).
3. Make sure that the valve opener is inserted with the
pin pointing upwards.
Strong pressure fluctuations
1. Clean the nozzle: Remove contamination and de-
bris from the nozzle hole, using a needle and rinse
with water from the front.
2. Make sure there is enough water in the reservoir or
water container.
Device leaking
1. The device leaks a small amount for technical rea-
sons. If the leak is severe, request authorised Cus-
tomer Service.
Warranty
The warranty conditions issued by our relevant sales
company apply in all countries. We shall remedy possi-
ble malfunctions on your appliance within the warranty
period free of cost, provided that a material or manufac-
turing defect is the cause. In a warranty case, please
contact your dealer (with the purchase receipt) or the
next authorised customer service site.
(See overleaf for the address)