Kärcher MIC 50, Руководство пользователя, Страница: 82 / 342

82 English
Help with errors
You can rectify minor faults yourself using the following overview.
If in doubt, please consult the authorised customer service.
 DANGER
Risk of electric shock
Turn off the appliance and remove the key prior to any care and
maintenance work.
Repair work and work on the electrical components may only be
performed by an authorised Customer Service.
13.8 Malfunctions with MIC 50 display
13.9 Malfunctions with MIC 70 display
Malfunction Cause Remedy
Warning light for en-
gine temperature lights
up
Engine temperature too high  Set the engine speed to idle mode.
 Clean the radiator.
 Check the level of coolant in the engine (when the en-
gine is switched off).
If the warning light does not go out within 5 minutes,
switch off the engine and call Customer Service.
Warning light for hy-
draulic oil temperature
lights up
Hydraulic oil temperature too high / low  Hydraulic oil temperature too high: Operate the engine
in idling mixture (supply) until the warning light goes
out.
 Hydraulic oil temperature too low: Cautiously warm up
the engine until the warning light goes out.
Warning light for bat-
tery lights up
Battery is not charging  Call Customer Service.
Malfunction Cause Remedy
+ Code P0217
Engine temperature too high  Set the engine speed to idle mode.
 Clean the radiator.
 Check the level of coolant in the engine.
If the warning light does not go out within 5 minutes,
switch off the engine and call Customer Service.
Hydraulic oil temperature too high  Operate the engine in idling mixture (supply) until the
warning light goes out.
Hydraulic oil temperature too low  Cautiously warm up the engine until the warning light
goes out.
Battery is not charging  Call Customer Service.
Fault has many causes  Call Customer Service.
Fault in the drive

Call Customer Service.
Code P0217 Fault has many causes  Call Customer Service.