Kärcher ICH 80/16 Ps, Руководство пользователя

Страница: 33 / 164

-
15
 General inspection of the correct over-
all condition of the interior cleaner (op-
erator).
 Check that the connection thread of the
interior cleaner is tightly seated (opera-
tor).
 Check whether all screws are fastened
tightly (operator).
 Check nozzles for tight seating (opera-
tor).
 Check that the protective bar (accesso-
ry) is tightly seated (operator).
 Check that the fall protection eye (ac-
cessory) is tightly seated (operator).
 Rinse out the filter (operator).
 Check the friction bearing of the water
turbine, replace if necessary (Customer
Service).
 Check the friction bearing of the spray
rotor, replace if necessary (Customer
Service).
 Applies only under ATEX conditions:
Check the ball bearings and replace if
these are free of grease/dry or do not
run smoothly (Customer Service).
 Check the ball bearings and replace if
these are free of grease/dry or do not
run smoothly (Customer Service).
 Rinse out the interior cleaner with water.
 Turn the interior cleaner over and allow
the water to drain out.
 Perform a visual inspection and repeat
the procedure if necessary.

DANGER
Risk of accident while working on the unit!
During all tasks:
 Remove voltage from and secure high
pressure pump at the main switch.
 Shut off the cleaning liquid supply.
Who may remedy faults?
 Operator
Work designated with the sign “Opera-
tor” may only be carried out by persons
who have been instructed in the safe
operation and maintenance on the high
pressure plant.
 Customer Service
Work designated with the sign “Cus-
tomer Service” may only be done by the
fitters of Kärcher Customer Service.
Maintenance intervals
Daily
Monthly or after 200 operating hours
Every 300 operating hours
Every 500 operating hours
Every 500 operating hours, at least
every six months
Every 1000 operating hours, at least
annually
Maintenance Works
Rinse out the filter
Troubleshooting
Troubleshooting notes
Who may remedy faults?
33 EN