Kärcher HDS 8/18-4 C, Руководство пользователя

Страница: 16 / 260

– 1
Please read and comply with these origi-
nal instructions prior to the initial opera-
tion of your appliance and store them for
later use or subsequent owners.
–
Before first start-up it is definitely necessary to read
the operating instructions and safety indications Nr.
5.951-949.0!
– In case of transport damage inform vendor immedi-
ately.
– Check the contents of the pack before unpacking.
For scope of delivery see illustration 1.
– At operating elevations of approx. 800 m above
sea level or higher, please contact your dealer to
have the burner setting adjusted to the elevation
and reduced oxygen content.
Electrical and electronic devices often contain compo-
nents which could potentially pose a danger to human
health and the environment if handled or disposed of in-
correctly. However, these components are necessary
for the proper operation of the device. Devices marked
with this symbol must not be disposed of with regular
household rubbish.
Notes about the ingredients (REACH)
You will find current information about the ingredients
at:
www.kaercher.com/REACH
Figure 1
1 Support for spray lance
2 Manometer
3 Recess for detergent suction hose
4 Recessed grip (both sides)
5 Connection for water supply with filter
6 Water connection adapter
7 High-pressure connection EASY!Lock
8 High pressure hose EASY!Lock
9 Spray lance EASY!Lock
10 High-pressure nozzle (stainless steel)
11 Pouring vent for detergent
12 Steering roller with fixed position brake
13 Fuel sieve
14 Safety lever
15 Power supply
16 Trigger
17 Tool bag
18 Safety latch of the hand spray gun
19 Trigger gun EASY!Force
20 Pouring vent for fuel
21 Dosage valve for detergent
22 Operating field
23 Storage for hand spray gun
24 Step depression
25 Handle
26 Nameplate
27 Cover lock
28 Storage compartment for accessories
29 Burner
30 Recess for spray pipe
31 Cover
32 Filling hole for RM 110/RM 111 system care
33 Pressure/quantity regulation of the pump unit
34 Oil tank
35 Oil drain screw
36 Backflow valve of the detergent infeed
37 Detergent suction hose with filter
38 Fuel filter
39 Fastening clamp
40 Hose (soft damping system) of the water shortage
safeguard
41 Water shortage safeguard
42 Sieve in the water shortage safeguard
43 Fine filter (water)
44 Float tank
Figure 2
A Power switch
1 Operating mode: Cold water operation
2 Operating mode: Hot water operation (e = Eco
mode, hot water max. 60°C)
3 Operating mode: Stream operation
4 Indicator lamp rotation direction
5 “Ready for use” indicator lamp
6 Fuel indicator lamp
7 Indicator lamp service
8 Indicator lamp for detergent
9 Indicator lamp system care
Contents
Environmental protection EN 1
Overview EN 1
Symbols on the machine EN 2
Proper use EN 2
Safety instructions EN 2
Safety Devices EN 2
Start up EN 3
Operation EN 4
Storage EN 5
Transport EN 5
Care and maintenance EN 6
Troubleshooting EN 6
Warranty EN 7
Accessories and Spare Parts EN 7
EU Declaration of Conformity EN 8
Technical specifications EN 9
Environmental protection
The packaging material can be recycled.
Please do not throw the packaging mate-
rial into household waste; please send it
for recycling.
Old appliances contain valuable materi-
als that can be recycled; these should be
sent for recycling. Batteries, oil, and sim-
ilar substances must not enter the envi-
ronment. Please dispose of your old ap-
pliances using appropriate collection sys-
tems.
Please do not release engine oil, fuel oil, diesel and
petrol into the environment Protect the ground and dis-
pose of used oil in an environmentally-clean manner.
Overview
Device elements
Operating field
0/OFF = Off
16 EN