Kärcher HD 9/100-4 Cage Classic, Руководство пользователя

Страница: 15 / 220

English 15
Changing working pressure
The working pressure is determined by the high-pres-
sure nozzle used.
This method means that the full flow rate is always avail-
able.
1. Select the correct high-pressure nozzle from the ta-
ble.
2. Turn the power switch to "0/OFF".
3. Pull the mains plug out of the socket.
4. Pull the trigger of the trigger gun until the device is
depressurised.
5. Unscrew the union nut from the spray lance.
6. Replace the high-pressure nozzle.
7. Screw on the union nut and hand-tighten.
Interrupting operation
1. Release the trigger.
The safety latch secures the trigger against uninten-
tional operation.
2. Place the spray unit on the spray lance storage and
the high-pressure gun storage.
Finishing operation
1. Release the trigger.
2. Turn the power switch to "0/OFF".
3. Close the water inlet.
4. Pull the trigger of the trigger gun until the device is
depressurised.
5. Release the trigger.
The safety latch secures the trigger against uninten-
tional operation.
6. Unscrew the water supply hose from the device.
7. Pull the mains plug out of the socket only when your
hands are dry.
8. Store the mains connection cable, high-pressure
hose and accessories with the device.
Transport
 Driving the device: Pull the parking brake pedal to
the rear and push the device using the push handle.
 Parking the device: Press the parking brake pedal
forward.
 Transporting the device in a vehicle: Secure the de-
vice in accordance with the respectively applicable
guidelines to prevent it from slipping or overturning.
 Transporting the device with a forklift: Secure the
device against falling using the transport eyelets ac-
cording to the applicable guidelines.
Crane transport
 DANGER
Improper crane transport
Risk of injury from a falling device or falling objects
Observe the local regulations for accident prevention
and the safety instructions.
Check the crane lifting gear for damage before each
crane transport.
The device may only be transported with a crane by per-
sons instructed in the operation of the crane.
Check the lifting gear for damage before each crane
transport.
Check the crane loading brace for damage before each
crane transport.
Lift the device only at the middle of the crane loading
brace.
Do not use an slinging chains.
Secure the lifting gear against unintentional unhooking
of the load.
Remove the spray lance with high-pressure gun and
other loose objects before transporting by crane.
Do not transport any objects on the device during the
lifting operation.
Do not stand under the suspended load.
Ensure that no persons are in the hazard zones of the
crane.
Do not leave the device handing unattended on the
crane.
1. Attach the lifting gear to the middle of the crane
loading brace.
Storage
몇 CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device during transport
and storage.
Store the device indoors only.
Frost protection
ATTENTION
Frost
Destruction of the device through freezing water
Drain all water from the device.
Store the device in a frost-free location.
If frost-free storage is not possible:
1. Drain the water.
2. Blow out the device with compressed air.
3. Pump commonly available anti-freeze through the
device.
Note
Use commonly available, Glycol-based vehicle anti-
freeze. Observe the handling instructions of the anti-
freeze manufacturer.
Care and service
Note
Old oil may only be disposed of at designated collection
points. Please dispose of any old oil at these locations.
Polluting the environment with old oil is punishable by
law.
Safety inspection/maintenance contract
You can agree on regular safety inspections or close a
maintenance contract with your dealer. Please seek ad-
vice on this.
Pressure
[Mpa (bar)] Nozzle size
[mm] Order number
Flat jet nozzle - F19
100 (1000)
1.1 6.025-466.0
85 (850) 1.2 6.025-208.0
60 (600) 1.3 6.025-469.0
45 (450) 1.4 6.025-212.0
35 (350) 1.5 6.025-204.0
Spotlight nozzle - F4
100 (1000)
0.9 6.025-470.0
70 (700) 1.0 6.025-198.0
50 (500) 1.1 9.885-951.0
35 (350) 1.2 6.025-199.0
25 (250) 1.3 6.025-196.0