background image

Second Way to Open-Emerency Keys Open

When the electronic system is abnormal or the password is forgotten or the battery is dead.
You can use the emergency to open the safe, ensure that belongs can be taken out

Setp 1:

Press the left or right end of the emergency 
keyhold cover and expose the emergency 
keyhold.(If the emergency keyhold cover is 
in the key box,this stepcan be omitted )

Step 2:

Insert the emergency key in the correct direction
(The key’s notch direction is to the left or right
but not up and down),then turn it clockwise to 
the limit to open the safes.

Step 3:

Step 4:

4

After the emergency is restored to its original 
position,pull it out,and put 4-AAbattery into the
battery box above the back cover of the door.
When installing the battery,pay attention to the 
positive and negative sides.
At this point,you can notice that the door bolt
is in an extended state.When the door bolt is 
extended,you cannot close the door,which will
damage the paint.

After installing the battery,restore the emergency
lock cover,the emergency lock cover may be in the 
key box.
Next,you can refer to:
Normal Open
Add Password
Close The Door

Prompt

If the emergency key is not pulled out ,the door of  the box can not be locked,
otherwise it will cause the code lock failure.
This emergency lock can only be used when the electronic system is abnormal 
when it is opened for the first time

Long-term use of the emergency key will affect the service life of the electronic system

Please do not put emergency keys in the safe box

Содержание BGX-D1-25MAZ













Отзывы: