![Kapsys SmartVision3 Скачать руководство пользователя страница 10](http://html2.mh-extra.com/html/kapsys/smartvision3/smartvision3_user-manual_3453552010.webp)
SmartVision3 - User Manual
Page 10 on 52
Activation
Introduction
SmartVision3 has a dual SIM / SD card connector. You can insert two SIM cards or an SD card
and a SIM card. You cannot have both the second Nano SIM card and the microSD card inserted
at the same time. SmartVision3 is only compatible with SIM cards in Nano SIM format. A modified
card that is thicker than the standard Nano SIM card will not fit properly on the tray and may
damage the SIM connector. The micro SD card is optional and is not supplied with the
SmartVision3. SmartVision3 supports SD cards up to 128 GB. We suggest you to have the
assistance of a sighted person for the insertion of the SIM card and the SD card.
Open the SIM tray
Lay the phone flat in front of you face up. Insert the tip of the SIM extraction tool supplied with your
phone into the SIM tray eject hole on the left side of the phone. Make sure the SIM extraction tool
is perpendicular to the hole. Otherwise, the device may be damaged. When inserting the SIM
extraction tool into the SIM tray eject hole, do not obstruct the tray to avoid damaging the eject
mechanism inside the slot. Push the tip all the way into the hole until the SIM tray pops out and
then pull it out.
The SIM tray has two compartments. The first compartment allows you to insert a SIM card or an
SD card. The second compartment allows you to insert only a SIM card.
Inserting a single SIM card
: position the SIM card with the metal side down, the beveled
corner at the bottom right, in one of the two available compartments of the SIM tray. Then
gently reinsert the SIM tray all the way into the slot. When reinserting the SIM tray into the
phone, make sure it is oriented horizontally so that the SIM cards do not fall out. The tray
should be fully inserted and not protrude from the slot or fall out. If the card is not firmly
seated in its compartment, the SIM card may be ejected or fall out.
Inserting two SIM cards:
position the first SIM card, metal side down, beveled corner at
the bottom right, in the first compartment of the SIM tray. Perform the same operation for
the second compartment of the SIM tray. Then gently reinsert the SIM tray all the way into
the slot. When reinserting the SIM tray into the phone, make sure it is oriented horizontally
so that the SIM cards do not fall out. The tray should be fully inserted and not protrude from
the slot or fall out.
Good to know: The order of the SIM cards in the tray does not matter. Configuration and
management of SIM cards is done via the phone's "Settings" application, "Network and Internet"
section.
Inserting an SD card and a SIM card
: position the SD card in the first compartment of the
tray, metal side down, bevelled corner down. Then position the SIM card in the second
compartment of the tray, metal side down, the bevelled corner at the bottom right. Then
gently reinsert the SIM tray all the way into the slot. When reinserting the SIM tray into the
phone, make sure it is oriented horizontally so that the SD card and SIM card do not fall
out. The tray should be fully inserted and did not protrude from the slot.
Charging the battery
Charge the battery before using the device for the first time or when you have not used it for a
while. Only use a compatible charger and cable for your device. Using an incompatible charger
and cable may cause injury or damage your device.
Improperly connecting the adapter can cause serious damage to the unit. Damage resulting
from misuse is not covered by the warranty.