Kapsys SmartVision3, Быстрый старт

Страница: 1 / 12

Quick starting guide
www. kapsys .com
Note
It is suggested to read the full user guide before using your
SmartVision3. An electronic version of this document is
available on our website at www.kapsys.com under the
Support section.
Box content
SmartVision3 is delivered with:
• A 220/110 Volts mains charger – 5 Volts USB
• A USB cable (C type)
• A pair of stereo earphones with microphone
• 5 NFC tags
• A SIM ejector tool
• A Quick starting guide
Overview
N° Item Description
1
3.5 mm
headphone jack Connect to stereo earphones
2 Power button
Press and hold to turn
SmartVision3 ON/OFF.
Press to turn the screen ON/OFF
(sleep mode)
3 Sim card tray To insert your SIM and SD card
4
Front-facing
camera
Use for self-portrait images and
online video chat
5 Receiver Main receiver for phone calls
6 Display
Display data and control with
touchscreen
7
Control keys
and
navigation pad
Navigate through
the screen with
multidirectional
commands (up,
down, right, left)
and a central
“OK” button.
Go back to home
screen
Open the menu
of the current
screen
Go back to the
previous screen
Delete user input
8
Alphanumeric
keypad
Use to input characters
9
Voice command
button
Use to dictate text and launch
specific features
10 Volume buttons Increase or decrease audio
output level.
11 Double rear
cameras
16 Mega 2 Mega Pixels
resolution
12 Finger print
sensor
Use to unlock the phone or make
secure payments.
13 Microphone
Main microphone for phone calls
and voice recognition
14 USB C type
connector
Charge the battery /
data synchronisation
15 Loudspeaker Main multimedia speaker
Getting started
Inserting the Nano SIM and micro SD cards
SmartVision3 has a dual SIM / SD card connector. You can
insert two SIM cards or an SD card and a SIM card. You
cannot have both the second Nano SIM card and the
microSD card inserted at the same time. SmartVision3
is only compatible with SIM cards in Nano SIM format. A
modified card that is thicker than the standard Nano SIM
card will not fit properly on the tray and may damage the
SIM connector. The micro SD card is optional and is not
supplied with the SmartVision3. SmartVision3 supports SD
cards up to 128 GB.
1.Open the SIM tray:
Lay the phone flat in front of you face up. Insert the tip of
the SIM extraction tool supplied with your phone into the
SIM tray eject hole on the left side of the phone. Make
sure the SIM extraction tool is perpendicular to the hole.
Otherwise, the device may be damaged. When inserting
the SIM extraction tool into the SIM tray eject hole, do not
obstruct the tray to avoid damaging the eject mechanism
inside the slot. Push the tip all the way into the hole until the
SIM tray pops out and then pull it out. The SIM tray has two
compartments. The first compartment allows you to insert a
SIM card or an SD card. The second compartment allows
you to insert only a SIM card
2.Inserting a SIM card and a SD card (optional):
Position the SD card in the first compartment of the tray,
metal side down, bevelled corner down. Then position the
SIM card in the second compartment of the tray, metal side
down, the bevelled corner at the bottom right. Then gently
reinsert the SIM tray all the way into the slot. When
reinserting the SIM tray into the phone, make sure it is
oriented horizontally so that the SD card and SIM card do
not fall out. The tray should be fully inserted and did not
protrude from the slot.
3.Inserting two SIM cards:
Position the first SIM card, metal side down, bevelled corner
at the bottom right, in the first compartment of the SIM tray.
Perform the same operation for the second compartment of
the SIM tray. Then gently reinsert the SIM tray all the way
into the slot. When reinserting the SIM tray into the phone,
make sure it is oriented horizontally so that the SIM cards
do not fall out. The tray should be fully inserted and not
protrude from the slot or fall out.
The position of the SIM cards in the tray does not matter.
The SIM cards configuration and management is done via
the phone’s «Settings» into «Network and Internet» section.
Charging the battery
Charge the battery before using the device for the first time
or when you have not used it for a while. Only use a
compatible charger and cable for your device. Using an
incompatible charger and cable may cause injury or
damage your device. To charge the battery, connect the
USB Type-C cable between the SmartVision3 USB
connector and the AC charger. Then plug the AC charger
into a wall outlet.
When the battery is fully charged, disconnect the charger
from the device.
Turning your smartphone ON/OFF
To turn on your SmartVision3, press and hold the ON/
OFF button located on the upper edge. When the device
vibrates, release the button. If the product does not turn on,
check that the battery has been properly charged.
To turn off the device, press and hold the ON/OFF button
located on the upper edge. Then select on the screen the
“ON/OFF” item then “Switch off”.
Restart the phone
To restart the device, make a long press on the ON/OFF
button located on the upper edge. Then select on the
screen the “ON/OFF” item then “Restart”. If your device
freezes and becomes unresponsive, press the power button
for 10 seconds to automatically restart the phone.
Standby mode
When SmartVision3 is turn ON, a short key press of the
ON/OFF button will bring it to standby mode (screen off),
or back to running mode (screen on). The standby mode is
activated after an inactive period for battery safe.
In standby mode the screen is off and the keyboard is
disabled, however the functions remain active. You can still
receive your calls, messages, emails etc.
Quick Starting guide SV3.indd 1 Quick Starting guide SV3.indd 1 22/06/2022 10:34:55 22/06/2022 10:34:55