would be able to detect, the user may change lux. setting to ‘M’ .
After each set up process, LMDT-810 detects movements within the detection
range in order to switch on the light and upon delay off time switch off the
light automatically.
Manual switch:
After the code is learnt, the Set/Del switch can also be set as a manual switch
to manually switch the light on/off. Adjust to “Set” to switch the light on,
adjust to “Del” to switch the light off. Manually adjust to “Del”, when
LMDT-810 detects movement, can still switch on connected light, and
automatically switches off the light at delay time end. However, if manually
adjusted to “Set” to switch light on, the light will not switch off automatically
at delay time end. Another connected transmitter must be used to switch the
light off.
D. Code deletion:
Purpose of code deletion: the user does not want LMDT-810 to work with a
certain receiver.In this case, the user should delete LMDT-810 code from the limited
memories of the self programming receiver to release the memory to the next
transmitter code setting.Place LMDT-
810 in ‘SET’ mode near to self programming
receiver which it works with.Press learning button of the receiver, LED flashes
continuously.Slide LMDT-
810 learn switch from ‘SET’ to ‘DEL’, LMDT-810 sends
code to receiver.Receiver connected lamp flashes twice to confirm the code deletion.
Receiver LED stops flashing.LMDT-810 and receiver are no longer connected.
TECHNICAL SPECIFICATION:
Delay-off Time: 5sec./1min./5min./10min
Learn Sw
itch: in ‘DEL’ mode when LMDT-810 ex-factory.
Brightness lux. setting: H/M/L
Frequency: 433.92 MHz
Waterproof: IP44
Transmitting distance with receiver: 30M closed area
Battery: 3V DC Alkaline battery AAA (1.5V) x 2 (Excluded in LMDT-810 exfactory)
Angle of detection: vertical- max. 202 degrees
horizontal- max. 110 degrees without lens-cover ~ 20 degree with lens-cover
uncut (ex-factory).
TROUBLE SHOOTING:
No activation: check battery life or polarity/ or unsuccessful connection.
Receiver stays ON continuously: LMDT-810 may be suffering from false
activation. Adjust the position/angle of the detector to solve the problem.
** Note: After installation, please check LMDT-810 is working properly in all
switch settings with compatible self programming receiver.
WARNING:
** LMDT-810 working compatible receiver DOES NOT operate in common
with other transmitter. Otherwise, if the receiver (lamp) is switched ON already
by another transmitter (for example: handy transmitter LYCT-505), then when
