W E B T U N E R
11.8.4. Reviewing the log file
WebTuner allows to review reports about the current scanning operation
and about the operations performed previously.
To review the required scanning report, follow these steps:
1. Click
the
run
hyperlink in the WebTuner main window with the
Scanner item selected in the list.
2. In the Scanner start parameters window (see Figure 38) press
the
view log
button. The window with the current scanning
status (if your Scanner is running) will appear on your screen.
The report may contain messages listed in the subchap-
ter 16.5 of Appendix B.
If the anti-virus scanner is not started, the window will contain the re-
sults of the previous scanning operation.
11.9. WebTuner:
administering
Updater
WebTuner for Updater. Defining Updater settings,
launching the program and reviewing the log.
WebTuner allows you to remotely administer the Updater program, i.e. to
change its settings, to launch it and to review the performance report.
To do this, use the
config
hyperlink on the WebTuner main window with
the Updater item selected in the list (see Figure 37).
By clicking the
config
hyperlink, you display the
Updater
window
(see Figure 40) with the following items:
179
