ENG_112620
1
1
2
3
6
7
4
2
4
3
1.
DISPLAY.
4-digit 7-segment display for channel information.
2.
STAND BY(POWER)
Switch the receiver power "ON" or "OFF".
3.
CH
▲
/
▼
( Program
▲
/
▼
)
Channel Up/Down or select item of
sub-menu.
4.
Smart card Slot
1 Slot for smart card (insert with chipside to up).
5
Front Panel
Note
The design of the Front/Rear Panel may be changed without any notice in advance.
1.
12V IN
Power supply connection.
2.
S/PDIF(Optical)
To connect a digital amplifier output.
3.
SCART FOR TV
Connect this port to the TV via SCART cable.
4.
HDMI/DVI
Use the HDMI cable to connect this jack to the
HDMI jack on your television for the best
quality picture.
5.
USB
Connect the USB memory with USB cable.
6.
ANT IN
To connect the digital CATV RF in Signal.
7.
LOOP OUT
Used to connect a RF signal from the STB
to either the RF input jack on your television
or to the next STB.
Rear Panel
STB_Adrenio_Cab_112620_KCF-SA700PCO_Eng.indd 2
2/17/2011 11:16:28 AM
