3. Wind
：
Pressing the button will select one of the blowing programs. The display indicates the
selected program.
Normal
：
Continuous blowing with low, medium or high speed.
Natural
：
Natural, gentle blast with low, medium or high speed.
Sleep
：
A function that automatically slows down the fan speed until it is completely shut down.
Starting with the highest fan speed, the air conditioner runs for 30 min, then switches to medium
speed mode, runs for 30 minutes, then then switches to slow speed mode for 30 minutes and
either shuts down or continues to operate until programmed self shutdown.
4. Timer
：
Press the button to set the fan auto-off from 1 to 12 hours. The display indicates the
selected time and the air conditioner will run for the indicated period of time. To deactivate the
auto-off, set the indicator to "00".
5. Swing:
Pressing the button will turn on the horizontal air oscillation mode. Pressing it again will
disable the mode. Adjusting the vertical blowing angle is done by manually adjusting the plates.
6. Cool
：
Pressing this button will turn on the cooling mode. Running the pump will force water
onto the cooling pad, and the fan will spread the cooled air.
NOTE
：
If the water level in the tank is below the 'MIN' indicator or there is no water in it at all, it
is prohibited to use the 'Cool' function. Before activating the cooling function check the water level
and if there is not enough water, add fresh water. It is recommended to change the water in the
tank at least once a week.
7. Ionizer
：
Pressing this button activates the ionizer function. An illuminated icon on the panel
indicates the start of ionization.
Heating function - remote control operation:
1. On/Off
：
Pressing the "ON/OFF" button on the panel or remote control will start the unit. It will
start working in the first heating mode (1000W). When pressed again, the heating will be turned off
and the unit will run for 30 seconds and then turn off.
2. Speed: This button does not work in heating mode.
3. Wind/heat
：
Press the button to select the heating power of the unit. When the button is
pressed, the indicator light on the panel will light up to indicate the heating mode. The device has 2
modes: low (1000W) and high (2000W).
4.Timer
：
Press the button to set the fan auto-off from 1 to 12 hours. The display indicates the
selected time, and the air conditioner will run for the indicated period of time. To deactivate the
auto-off, set the indicator to "00".
5. Swing: Pressing the button will turn on the horizontal air oscillation mode. Pressing it again will
disable the mode. Adjusting the vertical blowing angle is done by manually adjusting the plates.
6. Cool
：
This button does not work in heating mode.
7. Ionizer
：
Pressing this button activates the ionizer function. The glowing icon on the panel
indicates the start of ionization.
Remote control: The remote control is powered by two AAA batteries.
When using the remote control, point it towards the air conditioner. If the remote control does not
work, first check the batteries. Replace them if necessary. When the remote controller is not used