Kantech Telephone Entry System, Руководство по установке

Страница: 10 / 42

DN1769-1809
4
Compliance Specifications
FCC & IC Compliance
• This device complies with FCC 2000 Part 15 Class B (Radiated Emissions, Residential, USA). Operation
is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received including interference that may cause undesired operation.
This class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment
Regulations. The Kantech Telephone Entry System is also compliant with EN55022:1998, amendment
1:1995, Class B and CISPR 22.
•
TIA968 (FCC part 68) Direct Connection to the PSTN (Public Switched Telephone Network) USA.
• FCC Registration Number: ACTA US: V85OT01BKTES125 REN: 01B
• DOC - CANADA: The Canadian Department of Communications label identifies certified equipment. This
certification means that the equipment meets certain telecommunications network protective, operational,
and safety requirements. The Department does not guarantee the equipment will operate to the users
satisfaction.
- Before installing this equipment, users should ensure that it is permissible to be connected to the facilities
of the local telecommunications company. The equipment must also be installed using an acceptable
means of connection. The customer should be aware that compliance with the above conditions may not
prevent degradation of service in some situations.
- Repairs to certified equipment should be made by an authorized Canadian maintenance facility
designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment
malfunctions, may give the telecommunications company cause to request the user to disconnect the
equipment.
- Users should ensure, for their own protection, that the electrical ground connections of the power utility,
telephone lines, and internal metallic water pipe system, if present, are connected together. This
precaution may be particularly important in rural areas.
- CAUTION: Users should not attempt to make such connections themselves, but should contact the
appropriate electric inspection authority, or electrician, as appropriate.
- In addition, the Kantech Telephone Entry System complies with the CS-03 (Direct Connection to the Public
Switched Telephone Network, Canada).
- DOC registration Number: IC: 5690B-KTES125
CE & CB Scheme Compliance
•
EN50133-1 Alarm Systems – Access control systems for use in security applications, Europe
• EN55022 Radiated Emissions, Europe
• EN60950: Information technology equipment, safety
• EN61000-6-1: Electromagnetic Compatibility (EMC) - Generic Standards - Immunity for residential,
commercial and light-industrial environments
• EN61000-6-2: Electromagnetic Compatibility (EMC) - Generic Standards - Immunity for industrial
environments
• ETSI ES 203 021 Harmonized basic attachment requirements for Terminals for connection to analog interfaces
of the Telephone Networks, Europe
Australia, New Zealand
• Australia: The AS/ACIF 5002 Direct Connection to the Public Switched Telephone Network
• New Zealand: The PTC200 standard which is described as the following: Direct Connection to the Public
Switched Telephone Network, New Zealand
• CISPR 22: Information technology equipment - Radio disturbance characteristics - Limits and methods of
measurement
• The ferrite installation is mandatory, see Connecting the Telephone Line with the Ferrite (KTES-AUS
Model for Australia and New Zealand only) on page 24 .