Kanomax TABmaster 6715, Инструкция по эксплуатации

Страница: 14 / 27

13
2014 / 03 / 20
13 : 10
20.5
℃
30.7
%RH
m
3
/h
Atmos: kPa
Ready
ID:
Cycle:
Mode:
01
001
Single
START SAVE MENU
99.0
1. Start On
Press button
【
POWER
】
for 2 seconds for start On, displaying “ KANOMAX ” then enter into the testing
interface.
2. Power Off
Press
【
POWER
】
for 2 seconds, shut down and power off.
4.3. Keypad operation
Keypad panel includes control buttons, back-pressure switch and LCD adjusting keys.
1
．
Control buttons:
UP
：
Value increasing or Cursors upward moving.
SAVE
：
Save the current test results
SET
：
Store changes or enter into the selected option’s next level interface
MENU
：
On the main screen holding this down for 2 seconds will enter into the main “MENU”
OK
：
In t he “General Setting ” , pressing for 2 seconds will save the date or time ;
While in the “Record Processing” , pressing for 2 seconds will delete saved data.
START
：
Begin a measurement in main menu
STOP
：
Stop a measurement in main menu
BACK
：
Cancel or end an operation or return to the previous screen
EXIT
：
Return to the main menu
ESC
：
Stop printing when printing
DOWN:
：
Value decreasing or Cursors downward moving
2
．
Back pressure switch for on/off
Note
：
1) If you are not in the back pressure mode, shut down the back pressure plate and lock the
switch to avoid testing errors.
2) If the airflow is greater than 1500m
3
/h (883CFM), testing in back-pressure Mode is
recommended according to testing procedures.
POWER
START/STOP
SAVE
UP/SAVE
DOWN
SET/MENU/OK
START/STOP/
BACK/EXIT/ESC