NanoParticle Nebulizer: Operation
Liquid NanoParticle Sizer User Guide
45
Version 1.0.1
Operation Instructions
Once all installation procedures have been completed, you are ready to begin
standard operation of the Liquid NanoParticle Sizer system.
The touchscreen displays on NanoParticle Nebulizer, AFIMC, and Fast CPC
can be navigated by the F1, F2, F3, F4, and F5 (for AFIMC only) buttons. The
F buttons perform the following functions:
▪
F1: Press F1 to view instrument status.
▪
F2: Press F2 to view/change instrument settings.
▪
F3: Press F3 to view/change data collection options.
▪
F4: Press F4 to view onscreen graphs.
▪
F5: Press F5 to view home screen.
▪
System: The System button is for factory use only and is non-
functional for the customer.
Checking the Status
On the touchscreen displays of NanoParticle Nebulizer, AFIMC, and Fast
CPC, press
F1
to see the
Device Status
screen of each instrument. The current
time and date (hh:mm:ss, dd-mm-yyyy) is displayed below the screen
heading. Any status readings displayed in red indicate that the status is
outside the acceptable range or the set point has not been reached.
Details about the status readings of each instrument can be found in their
respective user manual supplied.
Changing the NanoParticle Nebulizer Settings
To change the NanoParticle Nebulizer settings, follow these instructions:
1.
Press F2 to see the NanoParticle Nebulizer
Device Settings
screen.
The
Device Settings
screen displays the following:
UPW On
