Kannad INTEGRA ARINC e-NAV, Руководство по установке и эксплуатации

Страница: 13 / 20

INTEGRA ARINC e-NAV
DESCRIPTION, INSTALLATION,
OPERATION MANUAL
PAGE: 9 of 14
REF.: DOC13033
INDEX: B
DATE: SEP 14/2016
© Orolia S.A.S.
5. OPERATION
NOTE: For ELT operation, refer to the relevant ELT Operation Manual.
All connections with the INTEGRA ARINC e-NAV are already done.

If the ELT switch is on OFF position, switch the ELT to ARM.

If the ELT switch is on ARM position, perform a self-Test by switching ELT
to OFF, then to ARM.
- After 5 seconds the LED of INTEGRA ARINC e-NAV switches ON:

GREEN: +28V DC is correct and ARINC Frame is valid,

Red: +28V DC is not correct and/or ARINC Frame is not valid.
- After 5 seconds, the LED switches OFF.

In the meantime, the ELT performs a Self-Test.

Check that the result of the ELT Self-Test is not faulty.
NOTE: Position will be transmitted only in the ELT is activated (manually by
switching to ON position or automatically if a crash occurs). The current position
will be transmitted about 50 seconds after ELT activation.