background image

INSTALLATION MANUAL OPERATION MANUAL  INSPECTION LOG

KANNAD 406 AF-COMPACT

PAGE: 105

FEB 01/2008

The number of 406 bursts transmitted is recorded. This information is 
available when the ELT is connected to a programming and test 
equipment (PR600).

D. Autonomy

The energy is provided by a battery pack composed of a LiMnO

2

 two-element 

battery (See pages 108 & 602 for Kit battery reference).

The duration of the 121.5 transmissions is over 48 hours at -20°C.

Unlike other ELTs, the 406 MHz transmission of KANNAD 406 AF-COMPACT 
is not stopped after 24 hours and 406 MHz transmission is continuing beyond 
48 hours.

The transmitter battery expiry date is fixed at 6 years after manufacturing. If no 
activation of the ELT occurs during the battery lifetime, it shall be replaced 
every 6 years

(see note below)

.

NOTE: The useful life time of batteries is twelve (12) years. To be in compliance 
with FAR regulations, they have to be replaced every (6) years when 50 
percent of their useful life has expired.

Lithium cells, lithium batteries and equipment containing such
batteries are subjected to regulations and classified under class 9 as
from 1st of January 2003.

Содержание 406 AF-COMPACT

























































































Отзывы: