1
Table of Contents
1) Introduction 1
2) Specifications 2
3) Package Contents 2
4) Unit Layout & Description 3
5) Connection and Operation 3
6) Connection Diagram 4
7) Warranty 4
Notice
KanexPro™ reserves the right to make changes in the hardware, packaging and any accompanying docu-
mentation without prior written notice
1
Introduction
1x8 VGA Extender over CAT5/6 with Audio up to 1,000ft. (300m)
The KanexPro 1x8 VGA extender over a single CAT5e/6 cable is designed for routing and distributing
four high-resolution VGA signals and stereo audio over remote distances up to 1,000ft (300m) Each
receiver set features a separate gain and peaking rotary switch used in adjusting brightness and skew
over long distances The 15-pin HD connectors are convenient and cost-effective for all input/ output
connections supporting full bandwidth Fully compatible with VGA to WUXGA graphics cardresolution
and HDTV’s to projectors In addition, each output performs a separate buffering to maintain signal
integrity and reject noise interference
Features:
• Extend eight independent high-resolution VGA signals with audio over Cat5E/6 cables up to
1,000 feet (300m)
• Adjust GAIN and PEAK levels to adapt for variable lengths of UTP cable on the receiver side
• Supports maximum resolutions up to WUXGA (1920x1200@60Hz)
• Stereo audio through 3.5mm jack
• Dual output for transmitter: VGA for local display and 8 x Cat5e/6
• EDID Compliant
• Rack or under-desk mountable
• 5VDC external power supply included
TM
Setup Guide
VGAEXTX8
